Select your language

Aluminum sulphate

HS Code: 28332200

Aluminum Sulfate, with the molecular formula Al2(SO4)3, is a mineral substance that is seen in the form of white crystals or powder. This chemical compound is non-flammable but and non-volatile. This aluminum salt is also known as alum, and when mixed with water, it changes the pH of the solution to acidity.

Parameters

Result

Al2(SO4)3

97%

Al2O

16%

H2O

32.9 ppm

Insult Mat

400ppm

Fe203

60 ppm

Ammonium sulphate

HS Code: 31022100

Ammonium sulfate is an inorganic sulfate salt obtained by reaction of sulfuric acid with two equivalents of ammonia. Ammonium sulfate is used as a fertilizer for alkaline soils and it is also used as an agricultural spray adjuvant for water-soluble insecticides, and fungicides. Growers apply ammonium sulfate primarily where they need supplemental N and S to meet the nutritional requirement of growing plants. Since ammonium sulfate contains only 21 percent N, other fertilizer sources more concentrated and economical to handle and transport often make a better choice for N-deficient fields. It provides an excellent source of S, which supports or drives numerous essential plant functions, including protein synthesis. Ammonium solfate general Information

Chemical formula:

(NH4)2SO4

Molecular weight:

132.14

Cas No:

7783-20-2


Ammonium solfate Properties

Appearance:

White crystalline powder

Oder:

Odorless

Mating point:

235-280 c

Solubility:

74.4 g/100ml in water(20 c)

Ammonium solfate specification

Test

Analysis

N content

21%

S content

24%

Moisture

Max 0.5%

Free Acid

0.025%

Ph

4.0-6.0

As

0.001 ppm

Benzoic Acid

HS Code: 291631

Benzoic acid is produced commercially by partial oxidation of toluene with oxygen.

Benzoic acid and its salts are used as food preservatives, represented by the E numbers E210, E211, E212, and E213. Benzoic acid inhibits the growth of mold, yeast and some bacteria. Benzoates are high solvating plasticisers for PVC, available as either monobenzoates (benzoates) or dibenzoates. They are mainly used in PVC plastisol applications including flooring and film, but also in adhesives and sealants In medical applications, Benzoic acid is a constituent of Whitfield's ointment which is used for the treatment of fungal skin diseases

Test parameter

specification

Unit

Assay

98.5-99.5

%

Acid value

455-457

Mg KOH/1g

Appearance

White Flaked powder

Visual

Melting point

121-123

Lorem ipsum

MAX 0.1

%


Sodium Benzoatc-Food gradc

Property

Requirement

Test method

unit

Appesrsnce

White or almost white powder or flake

BP/EP

-

Odor

Nerly odorless

-

-

Solubility

Freely soluble in water sparingly soluble in ethanol(90v/v)

BP/EP

V/V

Assay

99.5-100.5

BP/USP

%

Loss of Drying

<1.5

USP

%

Lead

<10

A.A

PPM

Arsenic

<3

A.A

PPM

Bitumen

HS Code:2714

Bitumen is a black, sticky and pasty substance that is used in insulating moisture and making asphalt. There are different types of bitumen, each of which has a specific application. Bitumen is a petroleum derivative and is often produced in an oil refinery.

Analysis

unit

limit

Test method

Densisty@25c

Kg/m3

1010-1160

ASTM D 70 orD3289

Penetration@25 c

Mm/10

60-70

ASTM D 5

Softening point

49-56

ASTM D 36

Ductility@5 c

Cm

70min

ASTM D 113

Loss on heating

Wt%

0.7max

ASTM D 6

Drop in penetration after heating

%

Max20

ASTM D 5

Flash point

232min

ASTM D 92

Solubility in trichloroethylene

Wt%

89.0 min

ASTM D 2042

Di Ethylene Glycol

HS Code:290943

Diethylene glycol (DEG) is an organic compound. This compound is a colorless, odorless, non-toxic, hygroscopic liquid with a sweet taste. This material is miscible in water, alcohol, ether, acetone and ethylene glycol. DEG is a widely used solvent.

Properties

Spec,Value

Unit

Test Method

Purity

99.8 MIN

Wt%

ASTM E 202

Mono Ethylene Glycol

0.05 MAX

Wt%

ASTM E 202

Tri Ethylene Glycol

0.05 MAX

Wt%

ASTM E 202

Water content

0.05 MAX

Wt%

ASTM 203

Acidity

0.005 MAX

Wt%

ASTM E 1613

ASH

0.005 MAX

Wt%

DC-254/A

SP.GR.@20/20℃

1.1175-1.1195

-

ASTM D 891

Color

10 MAX

Pt-co

ASTM D 1209

Distillation@76mm hg IDP

242MIN

ASTM D 1078

Distillation@76mm hg DP

250 MAX

ASTM D 1078

Ethyl Acetate

HS Code:29153100

Ethyl acetate, a colorless organic compound with a pleasant fruity aroma, has found its way into various industries due to its unique properties. Its versatility, low toxicity, and excellent solvent capabilities have made it a popular choice for a wide range of applications same as paints and varnishes, printing Inks, adhesives, thinners and paint strippers, nail polish removers and also pharma manufacturing. Ethyl Acetate Plants are designed mixing acetic acid and ethyl alcohol.

Characteristics

Specificaion

Appearance

Clear colorless liquid

Ester content as ethyl acetate w/w by gc

Min .99%

Water content w/w

MAX. 0.1

Acidity as Acetic Acid

MAX . 0.01

Relative density at 27/27℃

0.894-0.898

Residue on evaporation

Max0.01

Distillation range:Initial b .p at 760 mm hg

76.0 ℃ min

Distillation range:Dry poit at 760 mm hg

78.5℃ max

Packing : 220 litee new metal drums

N.W.=1180kg

LABSA

HS Code:34021190

Sulfocid is an economical and versatile, biodegradable anionic surfactant. This product can be neutralized with a variety of inorganic bases and organic amines to give a wide range of sulfonates with the properties of your choice. Sulfocid can be used to make both liquid and dry products. It is an effective surfactant in acidic environments. Sulfocid contains a minimum of sulfuric acid and upon neutralization produces material with little salt, light color and low odor, allowing wide latitude in formulations

Chemical name

Linear alkyl(c10-c13) benzene sulfonic acid

Chemical formula

R-C6H6-OSO3H R=C10-C13

Synonyms

LABS,LABSA

Molecular Weight

322

Cas No

27176-87-0

Methyl acetate

HS Code: 29183040

Methyl acetate is a neutral and colorless liquid with an ester-like odor. This substance is also known as methyl ethanoate or acetic acid methyl ester. The production line of this material with a purity of 85% is active and is continuously produced and sold. Methylb acetate is produced by reacting methanol with acetic acid and then distilling the final product. Applications of methyl acetate:

1. Solvent for nitrocellulose and for cellulose acetate

2. Preparation of paint, lacquer, thinners and strippers

3. To manufacture artificial leathers

4. Perfume industry

5. Organic synthesis

Item

Test Method

Result

Appearance

Visual Inspection

Colorless,Clear Liquidd

Color,pt-co unit

ASTM D 1209

10 (max)

Purity , wt%

ASTM D 3545

85 (min)

Water , wt%

ASTM E 1064

0.5 (max)

Acidity as Acetic Acid, Wt%

ASTM D 1613

0.01 (max)

Dcidity as Acetic Acid, Wt%

ASTM D 1298

0.910-0.925

Refractive index

ASTM D 1218

1.3575-1.3595

Boiling range at 760 mmHg

ASTM D 1078

55-59

Methanol

HS Code: 29051100

Methanol (CH3OH) is a simple one-carbon alcohol that is a colorless and tasteless with a faint odor. Other names are Methyl-alcohol and Wood-alcohol. It is most commonly produced from natural gas but can also be derived from renewable bio- feedstocks and from coal through gasification. colorless liquidAppearance:

BulkDelivery:

transportation:andStorage It can be stored and transported in carbon steel tanks with a suitable coating or stainless-steel tanks. Usually shipped via road by 25,000-liter tankers

Application:

- Production of all kinds of polymers by MTO technology

- Production of formaldehydes (formalin) for production of resins

- Production of M.T.B.E to improve the quality gasoline (fuels optimization)

- Production of DME, dimethyl ether

-Production of solvents and antifreeze

Production of acetic acid

- production of acetates such as methyl acetate, ethyl acetate, etc.

- Considering the foreseeable shortage of energy resources in the future, the direct consumption of methanol as a clean & green fuel or in the production of hydrogen for fuel cells is of great interest, which is known as one of the new uses of methanol.

TEST

METHOD

SPECIFICATION

PURITY WT%

ASTM E-349

Min 0.100

WATER WT%

ASTM E-1064

Max 0.003

ACETONE g ALDEHIDE WT%

ASTM D-1612

Max 0.0050

ETHANOL WT%

ASTM E-346

Max 0.7930

SP.GR@20/20°𝑪

ASTM D-4052

Max 0.003

ACETONE WT%

ASTM E-346

Min 60

PERMANGANATE TIME min

ASTM D-1363

Max 8

NON-VOLATILE MATTER mg/1000ml

ASTM D-1353

Max 1.0℃ to include 64.6=0.1℃ at 760 mmHg

DISTILLATION RANGE ℃@760 mmHg

ASTM D-1078

Max5

COLOR APHA

ASTM D-1209

Max 30

CARBONIZABLE APHA

ASTM E-346

Max 0,10

TOTAL IRON ppm

ASTM D-1068

Max 0.5

CHOLORIDE ppm

ASTM D-512

Ciear and free of suspended matter

APPEARANCE

--------

Non-residual odor

ODOR

ASTM D-1296

Max 0.003

ACIDITY as CH3 COOH%

ASTM D-1613

Max 0.003

MISCIBILITY (HYDROCARBONS)

ASTM D-1722

Passes Test

SULFUR pm

ASTM D-5623

Max 0.5

AROMATICS, UV Test

IMPCA 004-02

Passes Test

Mixed Xylene

HS Code:29024400

Mixed xylene is a colourless, flammable aromatic hydrocarbon liquid with a sweety odour. It is a mixture of different isomers of xylene such as meta-xylene, para-xylene, ortho xylene and ethylbenzene. Mixed Xylene is used as a solvent in many industries, such as paints and coatings, pesticides, printing, rubber & leather, etc. It can be used in place of toluene where slower drying process is desired. Mixed Xylene is a widely used solvent and is considered to be fit to be used as a solvent in paints, pesticides and other products due to its better adhesive properties.

Property

Specification value

Test method

Non aromatics,wt%

3.0 max

Astm D 2360-11

Distllation range℃@760mmHg

10 max

Astm D850-02

Initial boiling point℃@760 mmHg

135 max

Astm D850-02

Dry point℃@mmHg

145 max

Astm D850-02

Appearance

Clear liquid,free of sedimentation or haze at 18.3 to25.6℃

Visual

Copper corrosion

Pass(1a or 1b)

Astm D 849-11

Acid wash color

6max

Astm D848-09

Acidity

None detected

Astm D847-08

Sp ecific gravity at 15.56℃

0.865-0.877

Astm D4052-11

SO2/H2S

None detected

Astm D853-04

Vapor pressure(psi)

0.1

Astm D323-08

Polyethylene Glycol 400

HS Code: 39072090

Polyethylene glycols (PEGs) are condensation polymers of ethylene oxide and water with the general formula H(OCH2CH2)nOH. They are the most commercially important type of polyether. The low molecular weight compounds up to 700 are colorless, odorless viscous liquids with a freezing point from -10˚C (diethylene gycol), while polymerized compounds with higher molecular weight than 1,000 are wax like solids with melting point up to 67˚ C for n=180. While PEGs with different molecular weights find use in different applications and have different physical properties (e.g. viscosity) due to chain length effects, their chemical properties are nearly identical.

Test

Standard

Reference

Color, pt-co

Max 25.0

ASTM D1209

Viscosity at 98.9˚C, cSt

6.8‐8.0

USP41‐NF36

pH, 5% Solutio

4.5-7.5

USP41‐NF36

Residue on ignition, %wt

Max 0.1

USP41‐NF36

Assay (Average Molecular Weight), g/mol

380‐420

USP41‐NF36

Water, percent

Max. 2.0

ASTM E203

Mono Ethylene Glycol

HS Code:29053100

Mono Ethylene Glycol (MEG) is a colorless, odorless, and hygroscopic liquid that is soluble in water and used in various industrial applications. MEG is produced from the reaction of ethylene oxide and water, and it is the starting material for the manufacture of polyethylene terephthalate (PET) resin. MEG is also used as a coolant and heat transfer fluid in the automotive and HVAC industries, and it is an ingredient in antifreeze, de-icing solutions, and personal care products

Properties

Spec,Value

Unit

Test Method

Purity

99.8 MIN

Wt%

ASTM E 202

Di Ethylene Glycol

0.08 MAX

Wt%

ASTM E 202

Water content

0.08 MAX

Wt%

ASTM E 203

Acidity as Acetic Acid

10 MAX

PPM Wt%

ASTM D1613

ASH

0.005 MAX

Gr/100 ML

DC-254/A

Chlorides as chlorine lon

0.1 MAX

PPM WT%

EO-635

Aldehydes as Acetaldehyde

10MAX

PPM WT%

DC-163C

iron

0.1 MAX

PPM WT%

ASTM E 202

Color

5MAX

Pt-co

ASTM D 1209

Sp.GR.@20/20℃

1.1151-1,1156

----

ASTM D 891

(5-95 vol%)

1 MAX

ASTM D 1078

Distillation@76mm hg IBP

242MIN

ASTM D 1078

Distillation@76mm hg DP

250 MAX

ASTM D 1078

UV Transmittance @220 nm

70 MIN

T%

EO-577A

UV Transmittance @275 nm

95 MIN

T%

EO-577A

UV Transmittance @350 nm

99 MIN

T%

EO-577A

Naphtha

HS Code: 270750

Naphtha is a group of liquid hydrocarbon compounds that are very volatile and flammable. In fact, naphtha is a general term and refers to compounds that In crude oil distillation processes, they are placed between gas cuts and kerosene. These compounds make up about 11% of crude oil.

Characteristics

Units

Result

Test Method

Specific Gravity

-

0.68-0.69

ASTMD 5002

API Gravity

°API

74-76

ASTMD 5002

Sulfur Content (Total)

PPM

<100

ASTMD 5453

H2s Content

PPM

<1

RIPI

Mercaptan Content

PPM

<1

UOP 163

Water Content

PPM

11.0

ASTMD 6304

Nitrogen Content

PPM

1.0

ASTMD 4629

Aniline Point

°C

60.2

ASTMD 611

Salt Content

PTB

<1

ASTMD 3230

Reid Vapor Pressur

Psi

8.9

ASTMD 3230

Wax Content

Wt.%

<0.1

UOP 46

Color Saybolt

-

30.0

ASTMD 156

Copper Corrosion @ 50°C,3h

-

1a

ASTMD 130

Conradson Carbon Residue

Wt.%

<0.01

ASTMD 189

Total Acid Number

MgKOH/g

<0.05

UOP 565

Paraffin

HS Code: 271220

It’s essentially a by-product of petroleum refining and is a mixture of different types of hydrocarbons. Liquid paraffin has a thick, viscous consistency. Its density is less than water, and it’s insoluble in water and alcohol but soluble in chloroform, benzene, and other non-polar solvents. Liquid paraffin has a plethora of uses. In the medical field, it’s often used as a laxative or for skin treatments. In industries, it’s employed as a hydraulic fluid, in textile manufacturing, and as a lubricant in various machinery. Cosmetically, it’s a frequent ingredient in creams, lotions, and ointments due to its moisturizing properties.

PARAFFIN WAX

Item

Result

Test Method

Color

Snow White

Melting Point(℃)

57-62

ASTM D

Oil Content

0.5-1

ASTM D 721

Flash Point

200-220

ASTM D 92


PARAFFIN WAX 1-2%

CHARACTERISTICS

RESULT

METHOD

Color(lovidbond)

<1.5Y

IP-17

Oli content

1-2%

ASTM-D-721

Congealing point

55-58

ASTM-D-938

Viscosity at 100

4-5CST

ASTM-D-445

Flash point

MIN195

ASTM-D-92

Penetration25

14-18

ASTM-D-1321

Drop . melting.point

56-60

ASTM-D-127


PARAFFIN WAX 2-3%

CHARACTERISTICS

RESULT

METHOD

Color(lovidbond)

<1.5Y

IP-17

Oli content

2-3%

ASTM-D-721

Congealing point

55-57

ASTM-D-938

Viscosity at 100

4-5cst

ASTM-D-445

Flash point

Min195

ASTM-D-92

Penetration25

15-20

ASTM-D-1321

Drop . melting.point

56-59

ASTM-D-127

Liquid paraffin

Property

Range

Test Mehtod

Kinematic Viscosity @ 40℃ (cSt)

13.5-14

ASTM D-466

Kinematic Viscosity @ 100℃ (cSt)

3.0-3.5

ASTM D-466

Viscosity index

118

ASTM D-2270

Flash point ℃

180-200

ASTM D-92

Pour point ℃

0+-3

ASTM D-97

Appearance

Clear

Vis

Density @ 20℃

0.830-0.835

ASTM D-1298

Neutralization Value

<0.01

IEC 296

order

clear

-

Aromatic Content (ppm)

Max 100

GC

Sulphur (ppm)

Max 20

ASTM D-1266

Color (saybolt)

25

ASTM D-156

Sodium Hydroxide or CAUSTIC SODA

HS Code: 281512

Sodium hydroxide or caustic soda is a white solid substance with the chemical formula NaOH which is obtained through the process of electrolysis of sodium chloride soluble in the electrolytic containers. The purity of this product is min %98.5. Caustic soda is used in many industrial applications same as food and dairy, edible oils, metal industries especially Aluminum and zinc, glass manufacturing, paper decolorization, leather and textile, pharmaceutical industries

Parameter

Unit

Measured

Normal Range

NaOH

W%

98.5

Min 98

𝐶𝑂32−(𝑎𝑠 𝑁𝑎2𝐶𝑂3)

W%

<0.4

Max 1

𝐶𝑙−(𝑎𝑠 𝑁𝑎𝐶𝑙)

W%

<0.008

Max 0.06

𝑆𝑂42−(𝑎𝑠 𝑁𝑎2𝑆𝑂4)

W%

<0.004

Max 0.01

Silicates(𝑎𝑠 𝑆𝑖𝑂2)

W%

<0.009

Max 0.02

Matter insoluble water

W%

<0.001

Max 0.1

3O2Al as Al3

ppm

<3

Max20

Heavy metals as Pb

ppm

<2

Max20

Fe

ppm

<10

Max 30

O2Arsenic as As3

ppm

<1

Max 2

Hg

ppm

<0.1

Max 0.2

Appearance

OK

White flakes, Opaque Crystals, Free of impurities

Soda Ash

HS Code : 28362000

Soda Ash also known as sodium carbonate is one of the most important and widely used chemicals in industry and has many applications. The main use of soda ash is in the glass industry. Soda ash looks like a solid, white powder that has no odor and absorbs moisture, which is widely used in the detergent and disinfectant industry to protect against a variety of fungi and viruses. Types of soda ash bulk

Soda ash Dense:

This type of stone is prepared and used in glass industry, chemical industry, water purification, soap production and paper making. Heavy soda ash is mostly used in solid form.

Soda ash light:

This type contains 0.5% sodium chloride and is used as a pH regulator in the chemical industry. The main difference between heavy and light soda ash is in the density and type of use, otherwise they are not differe

Characteristics

Rang

Alkalinity (as Na2Co3) %

≥99

Chloride in term of NaCL %

≤0.4

Iron content %

≤0.004

Insolubility in water %

≤0.1

Na2o % (if it’s need) %

≥58

Sodium methoxide powder

HS Code: 29420090

Sodium methoxide is a white amorphous powder with a hexagonal structure, which is formed by degassing methanol. This substance belongs to the category of organic bases in chemistry and is a widely used reagent in industry and laboratory. This substance is also known by other names such as sodium methylate, methanol or sodium salt in the market. This material is flammable and catches fire at temperatures above 50 degrees Celsius.

Characteristics

Product Standard

Test Results

Method

Appearance

Clear Colorless Viscos Liquid

Complies

USP General Notices

Solubility

Miscible with Water and Methanol

Complies

USP 41 page 5771

Identification (Sodium)

Positive to Sodium Test

Complies

In-house

Moisture Content by KF

0.2% w/w Maximum

0.08

K.F. Titration

Free Alkalinity as (NaOH)

0.5% w/w Maximum

0.23

Calculated

Total Alkalinity as Sodium

Methoxide

29.5-31% w/w

30.27

Titration

Net Sodium Methoxide %

29.5-30.5% w/w

30.04

Calculated

Sodium Carbonate Content

0.1% w/w Maximum

0.1

Titration

Mercury Content

NIL

Complies

In-house

Iron Content

Not more than 4 ppm

Complies

In-house


Sodium methoxide powder

Characteristics

Product Standard

Test Results

Method

Appearance

White Color

Complies

USP General

Notices

Solubility

Miscible with ethanol, methanol, fats and esters. Immiscible with hydrocarbons and organic solvents.

Complies

USP 41 page 5771

Identification (Sodium)

Positive to Sodium Test

Complies

In-house

Moisture Content by KF

0.5% w/w Maximum

0.26

K.F. Titration

Free Alkalinity as (NaOH)

1.5% w/w Maximum

0.58

Calculated

Total Alkalinity as Sodiu Methoxide

>99% w/w

99.31

Titration

Net Sodium Methoxide %

>97% w/w

98.73

Calculated

Sodium Carbonate Content

0.3% w/w Maximum

0.27

Titration

chldrides

<100 ppm

Complies

In-house

Mercury Content

NIL

Complies

In-house

Iron Content

Not more than 4 ppm

Complies

In-house

Base Oil Group I Group II Group III

HS Code: 1503

Base oil refers to oils that have a lubricating grade and are first produced by refining crude oil (i.e. mineral base oil) or through chemical synthesis (i.e. synthetic base oil).

property

Unit

Test Method

Specification

Typical Result

Appearance

-

Visual

C g B

C g B

Color

-

ASTM D-1500

Max 2

1.8

Density 15 ℃

Kg/m3

ASTM D-4052

-

893

Kinematic viscosity at40℃

Mm2/s (CST)

ASTM D-445

-

108

Kinematic viscosity at100℃

Mm2/s (CST)

ASTM D-445

Min 10.8

10.9

Viscosity index

-

ASTM D-2270

Min 87

88

Flashpoint

ASTM D-92

Min 235

245

Pour point

ASTM D-97

Max -3

-4

Noack at 250℃

Wt %

ASTM D-5800

Max 5

3.5

Sulfur

Wt %

ASTM D-4951

-

1.2

Texapon(SLES)

HS Code:3402

TEXAPON N70 or SLES 70% is a highly concentrated sodium lauryl ether sulphate derived from natural fatty alcohols. Due to its high content of washing active substance, TEXAPON N70 is particularly suited for highly Concentrated end-products, or if raw materials with a lower water content are required. It is used as a common cleanser in most head and body health products such as shampoo, dishwashing liquid, carwash and salty foam, toothpaste, liquid soap, shampoo, cream and skin and hair, shower gels, foam baths, liquid and washing powder is used. SLES is also used in the textile industry, printing and dyeing.

Specification

Standard

Resolts

Uncertainty In Measurement

Molecular weight(g/mol)

384

384

02

Free Oil

Max2.5

2.1

0.15

Active Matter

68-72

69.9

0.19

Color (Hazen)

Max.30

13

1

Sodium sulfate

Max 1.5

0.50

0.03

Ph(5%(W/))

7-9

7.6

0.06

1,4 Dioxane

Max.50

36

0.8

Appearance

Colorless or light byellow

Light yellow

-

NaCl%

Max0.5

0.22

002

Oxidants(ppm)

0

0

0.5

Fe(ppm)

Max20

<7

-

Formaldehyde(ppm)

Max250

0

-

Heavy metals (ppm)

Max20

<1

-

Chemical Formula

Linear alkyl Benzene (LAB)

HS Code: 340231

Linear Alkylbenzene (LAB), which is made up of two groups, Alkyl and Benzene, is also known as
detergent alkyl. It is an intermediate substance in the petrochemical industry that is obtained from the alkylation of Benzene from paraffin in raw materials. It is used to make Linear Alkylbenzene Sulphonate (LAS), which is used exclusively as a Surfactant in the production of detergents and cleaners.

PROPERTY

TEST METHOD

SPECIFICATIO

TYPICAL VALUE

Linear Alkyl Benzene , wt

UOP 698

92 min

93.09

Carbon Distribut on

UOP 698

< LAB 10

UOP 698

1 max

0.41

LAB 10

UOP 698

15 max

11.67

LAB 11

UOP 698

24-36

32.44

LAB 12

UOP 698

26-40

28.74

LAB 13

UOP 698

17-27

20.14

LAB 14

UOP 698

1 max

0.10

> LAB 14

UOP 698

0.3 max

0.23

2-Phenyl Alkanes , wt%

UOP 698

20 max

15.41

Total Normal Paraffin , wt%

UOP 698

0.5 max

0.36

Average Molecular Weight

UOP 698

238-243

240.1

Density at 15.6°C , gr/cm3

ASTM D-4052

0.8575-0.8700

0.8597

Bromine Index , mg Br/100gr of Sample

UOP 304

10 max

3

Water , ppm

UOP 481

200 max

5

Saybolt Color

ASTM D-156

+29 min

>+30

Tetralins , wt%

ECOSOL , UOP-929

1 max

0.56

Sulfonatability , wt%

UOP 429

98 min

98.8

Doctor Test

ASTM D-4952

Negative

Negative

Acid Wash Color , T%

EM 07203

15 min

64.1

Refractive Index at 20°C

ASTM D-1218

1.480-1.490

1.480

Flash Point °C

ASTM D-93

140 min

142

UREA 46%

HS Code: 284700
Granular urea, with a 46 percent nitrogen content, is a solid nitrogen fertilizer product. Produced from

ammonia and carbon dioxide, it has the highest nitrogen content of any solid nitrogen fertilizer. Granular urea can be applied by itself, or it can be easily mixed with phosphate and or potash fertilizers, often as part of a total NPK (nitrogen, phosphate, and potash) plant food mix. As a granular product, urea can be applied directly to the soil using conventional spreading equipment. It is the most common form of nitrogen fertilizer used around the world.

PROPERTY

UNITS

VALUE

NITROGEN CONTENT

WT%

46 MIN.

MOISTURE

WT%

0.5 MAX

BIURET

WT%

1 MAX

PARTICLE SIZE(2-4MM)

%

90 MIN.

FORMALDEHYDE

WT%

0.55 MAX.

White spirit

HS Code:27101221

White spirit is a flammable, clear, colourless liquid. It is a mixture of chemicals known as petroleum hydrocarbons. White spirit is used in paints, coatings, waxes, varnishes, adhesives, printing inks and liquid photocopier toners. In industry it is also used as a solvent for, cleaning, degreasing and substance extraction. In households, white spirit is commonly used to clean paint brushes or thin paint. White spirits are often used to clean and unclog screens after printing with oil-based textile and plastisol inks.

ANALYSIS

UNIT

LIMIT

TEST METHOD

DENITY@ 15

KG/M

775MIN

ASTM D 1298

DISTILLATION

“ D 86

I.B.P

142-158

“ “

10%

158 MIN

“ “

50% “ @

179MAX

“ “

90 “ @

194MAX

“ “

DRY POINT

198MAX

“ “

RESIDUE

VOL%

1.5 MAX

COLOUR SYBOLT

-

25 MIN

ODOUR

-

MERCHANTABLE

-“ D 156

FLASH POINT TAG

38 MIN

“ D 56

CORROSION – 3 HRS@100

-

1A

“ D 130

SULPHAUR TOTAL

WT%

0.1MAX

“ D 1266

DOCTOR TEST

-

NEGATIVE

“ D 4952

AROMATIC CONTENT

VOL%

20 MAX

“ D 1319

GUM EX ISTENT

MG/100ML

5MAX

“ D 381

NEUTRALITY

-

PASS

BS.245

ACIDITY OF RESIDUE

-

PASS

“ D 1093

Footer Logo

Start a great business with us.

Select your language

company address